* Sea-Bird SBE 9 Data File:
* FileName = C:\Data\simz2014c29.hex
* Software Version Seasave V 7.22.4
* Temperature SN = 2813
* Conductivity SN = 0492
* Number of Bytes Per Scan = 37
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jul 30 2014 07:53:00
* NMEA Latitude = 38 22.00 N
* NMEA Longitude = 123 05.01 W
* NMEA UTC (Time) = Jul 30 2014  14:52:58
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.1g
* number of scans to average = 1
* pressure baud rate = 9600
* NMEA baud rate = 4800
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
** Project: SIMZ
** Platform: Rachel Carson
** Cruise: SIMZ2014
** Site: 29
** Cast Sequence: 29
** CTD ID: 91723
* System UTC = Jul 30 2014 14:53:00
# nquan = 30
# nvalues = 16                          
# units = specified
# name 0 = timeJ: Julian Days
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = depSM: Depth [salt water, m]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = c1S/m: Conductivity, 2 [S/m]
# name 5 = t090C: Temperature [ITS-90, deg C]
# name 6 = t190C: Temperature, 2 [ITS-90, deg C]
# name 7 = potemp090C: Potential Temperature [ITS-90, deg C]
# name 8 = potemp190C: Potential Temperature, 2 [ITS-90, deg C]
# name 9 = xmiss: Beam Transmission, Chelsea/Seatech [%]
# name 10 = bat: Beam Attenuation, Chelsea/Seatech [1/m]
# name 11 = v1: Voltage 1
# name 12 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 13 = v2: Voltage 2
# name 14 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 15 = v3: Voltage 3
# name 16 = upoly0: Upoly 0, QCP-200
# name 17 = v4: Voltage 4
# name 18 = par: PAR/Irradiance, Biospherical/Licor
# name 19 = v5: Voltage 5
# name 20 = altM: Altimeter [m]
# name 21 = v6: Voltage 6
# name 22 = sal00: Salinity, Practical [PSU]
# name 23 = sal11: Salinity, Practical, 2 [PSU]
# name 24 = sigma-�00: Density [sigma-theta, Kg/m^3]
# name 25 = sigma-�11: Density, 2 [sigma-theta, Kg/m^3]
# name 26 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
# name 27 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 28 = nbin: number of scans per bin
# name 29 = flag: flag
# span 0 = 211.620523, 211.623803       
# span 1 =      2.015,     17.129       
# span 2 =      2.000,     17.000       
# span 3 =   4.155001,   4.256720       
# span 4 =   4.112891,   4.255864       
# span 5 =    15.1285,    16.2359       
# span 6 =    14.7024,    16.2396       
# span 7 =    15.1259,    16.2354       
# span 8 =    14.6999,    16.2391       
# span 9 =    76.3067,    78.3744       
# span 10 =     0.9746,     1.0817      
# span 11 =     3.8505,     3.9532      
# span 12 =     2.2809,     2.5371      
# span 13 =     2.2809,     2.5371      
# span 14 =     4.7459,     6.3608      
# span 15 =     0.2098,     0.2744      
# span 16 = -0.0660660,  80.918718      
# span 17 =    -0.0001,     0.0826      
# span 18 = 5.7764e-01, 4.4563e+01      
# span 19 =     0.5154,     2.1270      
# span 20 =       6.63,     130.78      
# span 21 =     0.3313,     6.5392      
# span 22 =    33.6042,    33.6381      
# span 23 =    33.5925,    33.6234      
# span 24 =    24.6236,    24.8948      
# span 25 =    24.6146,    24.9762      
# span 26 =    5.65662,    6.34997      
# span 27 =   99.02420,  113.27144      
# span 28 =          9,       3157      
# span 29 = 0.0000e+00, 0.0000e+00      
# interval = meters: 1                  
# start_time = Jul 30 2014 14:52:58 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="13" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2813</SerialNumber>
#       <CalibrationDate>01-Mar-13</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.31934898e-003</G>
#       <H>6.42150445e-004</H>
#       <I>2.25157632e-005</I>
#       <J>2.11379910e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>0492</SerialNumber>
#       <CalibrationDate>12-Feb-13</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.16483702e+000</G>
#         <H>4.44743188e-001</H>
#         <I>-5.16953792e-004</I>
#         <J>4.34399878e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>1723</SerialNumber>
#       <CalibrationDate>12-Feb-13</CalibrationDate>
#       <C1>-4.620354e+004</C1>
#       <C2>-4.866022e-001</C2>
#       <C3>1.372270e-002</C3>
#       <D1>3.501600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.021120e+001</T1>
#       <T2>-4.159869e-004</T2>
#       <T3>3.603660e-006</T3>
#       <T4>4.379940e-009</T4>
#       <Slope>0.99990213</Slope>
#       <Offset>-0.94803</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.146000e-002</AD590M>
#       <AD590B>-8.549020e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>0849</SerialNumber>
#       <CalibrationDate>06-Feb-13</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.85280362e-003</G>
#       <H>6.84845710e-004</H>
#       <I>3.07432916e-005</I>
#       <J>2.77832187e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>0685</SerialNumber>
#       <CalibrationDate>30-Jan-13</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-3.97190273e+000</G>
#         <H>4.26113826e-001</H>
#         <I>-1.17809435e-005</I>
#         <J>2.06508655e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Free -->
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Transmissometer, Chelsea/Seatech -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-499</SerialNumber>
#       <CalibrationDate>25-Feb-11</CalibrationDate>
#       <M>20.1312</M>
#       <B>-1.2079</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0361</SerialNumber>
#       <CalibrationDate>05-Jan-14</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.6598e-001</Soc>
#         <offset>-0.4848</offset>
#         <A>-3.2007e-003</A>
#         <B> 1.4642e-004</B>
#         <C>-2.6095e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.2300</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>263</SerialNumber>
#       <CalibrationDate>20-jan-10</CalibrationDate>
#       <ScaleFactor>2.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0200</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, User Polynomial -->
#     <UserPolynomialSensor SensorID="61" >
#       <SerialNumber>7137</SerialNumber>
#       <CalibrationDate>08-Feb-10</CalibrationDate>
#       <SensorName>QCP-200</SensorName>
#       <A0>0.00020000</A0>
#       <A1>979.10000000</A1>
#       <A2>0.00000000</A2>
#       <A3>0.00000000</A3>
#     </UserPolynomialSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4252</SerialNumber>
#       <CalibrationDate>08-Feb-10</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>3048780487.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.49530000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>118348</SerialNumber>
#       <CalibrationDate>01-SEPT-02</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jul 30 2014 10:03:33, 7.22.4 [datcnv_vars = 22]
# datcnv_in = c:\Data\simz2014c29.hex c:\Data\simz2014c29.XMLCON
# datcnv_skipover = 1
# datcnv_ox_hysteresis_correction = yes
# filter_date = Jul 30 2014 10:03:45, 7.22.4
# filter_in = c:\Data\simz2014c29.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM depSM
# alignctd_date = Jul 30 2014 10:03:48, 7.22.4
# alignctd_in = c:\Data\simz2014c29.cnv
# alignctd_adv = sbeox0V 5.000, v2 5.000                                                                                                                                                                                             
# celltm_date = Jul 30 2014 10:03:50, 7.22.4
# celltm_in = c:\Data\simz2014c29.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# loopedit_date = Jul 30 2014 10:03:52, 7.22.4
# loopedit_in = c:\Data\simz2014c29.cnv
# loopedit_minVelocity = 0.250                                                                                            
# loopedit_surfaceSoak: do not remove                                                                                     
# loopedit_excl_bad_scans = yes
# Derive_date = Jul 30 2014 10:03:55, 7.22.4 [derive_vars = 6]
# Derive_in = c:\Data\simz2014c29.cnv c:\Data\simz2014c29.XMLCON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Jul 30 2014 10:03:59, 7.22.4
# binavg_in = c:\Data\simz2014c29.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = no
# binavg_skipover = 0
# binavg_surface_bin = yes, min = 0.300, max = 0.500, value = 0.000
# file_type = binary
*END*
۞SCL�@@/�@u�@+��A���A���A
��AꑙB�@�?`�w@t`"@�_"@`�@ڣ\>b֡B6B�=�@2B� @@��A��?
mB(bB�A��A�2�@���B�D�SC�tA@@@7�@	0�@
�A��A�A��A��B��? �x@�/"@b/"@�ޗ@��V>��dB5Eo=���A��?ҢA�A�?�nB�cB+��A���A/��@���BxB��SCs��@�@��@%�@�&�A�@�A�%�Ag?�A���B��?
x@A� @Ϝ @�*�@�sj>�~)BMD1=w�A��?�5�AT�f?VnB�bB|'�Ao�A���@g��B�B��SC�6�@�@�ه@�ȇ@L�A�A��Av߀A�әB�e�?�[x@-" @�! @�K�@~�b>\�A��<ظxA_��?�XA�Q-?�kB@aB/�AQ#�A�E�@���B�B��SC�t�@�@u��@�@C�A;A�AA�AM?�A��B's�?��v@�@�@>�@�:r>=ݰA(��<��AAu��?��GA��?1mB`B�Y�A�E�A�.�@�2�BB��SC6��@�@���@�y�@��A	�A�	�A��A�̘B�Չ?P�v@k*@*@[۴@�{>�hA�os<NfALŵ?�:Ao�?UlB�_B�d�A)O�AǮ�@2�B�B��SC��AA�9�@V6�@N�~Ah�~A.�~AG�~A��B}t�?%nv@�o@oo@��@��v>��3A�<<fB�@�f�?��(A�?�jB�^Bj��A�u�A
��@מ�BB��SC�AA��@��@��}A� }A�{}A�}A���BG<�?�
w@/6@�5@�k�@�-q>���@���;ϕ�@�T�?��AY��>�lBu`B~��Af��A�H�@)��B�B�SC,7!A Av��@���@{{A�U{A#{A�O{AF��B�a�?��w@��@d�@�:�@'�>�@K�;T�b@�t�?ܽFBI�@RnB{aB��Ax��A�>�@��BB
�SCfV1A0A+`�@�[�@ZzA
zAf�yA
zA��B�?�x@~�@-�@�@�@��>.�@�Ѕ;�&@�.y?+y�@�-�>�sBjhB��A�
�A|9�@by�B�B�SC�uAA@A\C�@e9�@�UyAHSyA�MyA�KyAr�Bz�?f�x@w�@*�@Sk�@�D�>�O!@U�(;�>�?�>_?��@Z��>~wB�lB�8�A�(�A�/�@,*�BHB�SC�QAPA(3�@�)�@��xA��xA��xA��xAS�B��?�+w@�p@�p@�y�@,/�>@;�;���?y�D?n�~AX�K?L~B�rBnP�A�=�A5��@�H�B�B�SC4�aA`AR�@���@��wAZ�wA��wA��wA�ژB7��?��v@��@��@���@K��>��?N�:��?8�1?�0lB��<@�B(tBs�A_�A���@)_�BB
�SC��qApA�G�@s2�@&�sA�sA��sA��sAW��B�Z�?��y@��@��@^׫@�op>�1x?�:6�I??��B���?��B�vB:��A%��A�@d�B/C^�SCk��A�A���@���@�|uA�quA�ruA�guA��B��}?�|@xM@M@r��@s�v>�M����!?Ε	?q�>B��@�BvBô�A��A���@�[�BPEE��SC	�A�A���@Μ�@"rA=kA�rA�2kA���B�y?�}@�$@4$@� �@3>n>Sl?i�:��?��?��CHA�@u�Ba~Bx(�AT��AI��@%��BA